System Cleaner 500
A liquid cleaner for use on the external surfaces of hot-melt dispensing systems and for internal rinsing of the systems.
APPLICATION:
Perfect for removing glue deposits, residues of polyurethane adhesives (PUR), etc.
CHARACTERISTIC:
| The appearance of the substance | Oily liquid |
| Color | Clear, transparent |
| Flash-point | about 271˚C |
| Relative density @25˚C | 1.03 g/cm3 |
| Viscosity@25˚C | 16,4 mPas |
APPLICATION METHOD:
Apply the agent on the contaminated surfaces with a brush, cloth, or soak the contaminated element in liquid. Then remove the remnants of the agent from the surface of the material with a cloth. In the case of rinsing the system, clean the tank of adhesive and impurities mechanically, then flood the system with DynaWax 500 and rinse the system in a closed circuit, through hoses, pouring the liquid back into the tank. Use personal protective equipment: chemical resistant rubber gloves, protective glasses and protective clothing. Use only in well-ventilated areas. When applied to surfaces with higher temperatures, the agent evaporates intensively. Do not inhale the vapors. Do not exceed the temperature of 180oC when flushing the system. Keep naked flames away from hot fluid. Do not use on surfaces covered with paints, varnishes, etc.
PACKAGE:
5l container
STORAGE AND DURABILITY
Store in tightly closed packages in a well-ventilated room away from sources of heat and ignition, sparks, open flames, strong oxidizing agents and direct sunlight. Keep away from strong oxidants, strong reducing agents and moisture.
Use only in rooms with adequate exhaust ventilation. Handle empty tanks with care - substance residues may be flammable and cause burns in the presence of high temperature / sparks / open flame. Besides the fire / explosion hazard, the residual vapor and liquid can also be toxic. The container that is not currently in use must be tightly closed. Keep away from heat and sources of ignition. Before maintenance and repair work, isolate, ventilate, drain liquids, wash and blow through the entire system or device with air. Wear the prescribed personal protective equipment. Avoid contact with incompatible agents.
The product remains stable for 730 days under typical storage conditions.
